2-way active speaker equipped with one 10” woofer and one 1” compression driver (1” voice coil)
KL series aims to enhance usability and versatility in dBTechnologies’ 2-way active speaker series: combining efficiency to a professional sound performance, KL systems feature Bluetooth® connection, 3 INPUT channels, impressive SPLs and a powerful DSP where linear phase FIR filters ensure the most accurate sound reproduction.
The system is driven by a powerful and efficient 400 W amplifier featuring dBTechnologies’ advanced DSP processing where linear phase FIR filters allow the systems to deliver a coherent audio performance, uniform and crystal-clear from every listening position.
Moreover, users are enabled to enhance lower and upper frequencies with the convenient DSP preset function.
All cabinets feature 3 INPUT channels with independent level management: CH 1 is a balanced combo XLR/6.3 mm Jack line/mic INPUT with a switch to select source; Ch 2 is a balanced XLR and TRS jack IN; CH 3 allows to connect any device via Bluetooth® connection.
A balanced link XLR-M Output allows connection to a second loudspeaker or a mixer. A slide switch allow to select which signal is sent to the main output: LINK (the signal is taken before any level control) MIX (the signal is determined by the level control of each channel and Main).
The solid and versatile cabinets come with a clean and contemporary full grille design, enhancing both portability thanks to 3 integrated 3 handles (1xside and 1 on top) and multifuncionality: each cabinet can be used horizontally as a stage monitor (on both sides) and features a pole mount cup with 2 tilt angle options (0° and 7.5°) to use KL on tripods or stacked on dBTechnologies Subs.
KL comes with its soft cover equipped with a pocket specially designed for cable storage.
- Speaker Type: 2-Way Active Speaker
- Acoustical data
- Frequency Response [-10dB]: 55 – 18.000 Hz
- Max SPL: 125 dB
- HF: 1″ CD, 1″v.c
- LF: 10″, 2″ v.c.
- Dispersion: 90°x60°
- Crossover Frequency: 2000 Hz (24 dB/oct.)
- Amp Technology: Class D(LF)+Class AB (HF)
- Power Peak (LF+HF): 400 W
- Controls: 1x volume, 1x slide switch mic/line
- Indicators: Power on/signal/limiter LEDs
- Controller: DSP 20/56 bit
- AD/DA Converter: 24 bit/ 48 Hz
- Systems Presets: Playback, Flat, Bass Boost, Wedge
- Limiter: Peak, RMS, Thermal
- Advanced DSP Functions: Linear Phase FIR Filters
- Signal Input:
- Bluetooth Input: 1x Bluetooth receiver
- SIGNAL Out: 1x XLR Male (LINK/MIX)
- Housing: Polypropylene
- Handles: 3 (2 on side 1 on top)
- Angles Up: Monitor Use 40°
- Pole Mount: 36 mm, double positioning
- Width: 310 mm (12.2 in)
- Height: 521 mm (20.51 in)
- Depth: 292 mm (11.51 in)
- Weight: 11.7 kg (25.79 lbs)
Note: Data is not binding; dBTechnologies reserves the right to modify data at any time without notice.